who decides to implement split mopp

who decides to implement split mopp

who decides to implement split mopp

Hello dear friends, thank you for choosing us. In this post on the solsarin site, we will talk about “who decides to implement split mopp”.
Stay with us.
Thank you for your choice.

who decides to implement split mopp
who decides to implement split mopp

In which mopp level would you wear the cpo protective mask, gloves, overboots, field gear, and personal body armor

– MOPP Level 4

Which term provides guidance by indicating safe distances to avoid exposure due to chemical vapor hazards from contaminated resources?

– CCOR

Clear access routes into and out of chemical zones used to avoid contamination are called?

–  zone transition points

When should you replace your cpo if it becomes wet through the inner lining with any of these materials such as petroleum, oil, hydraulic fluid, body fluids, (urine and feces), and many common insect repellents?

– replace as soon as your mission allows

As part of your GCE you will be issued protective foot covers. The footwear covers are designed to ____.

-Protect your feet and ankles from contamination

What can blister agents do to rubber gloves?

-reduce the protection time provided by the gloves.

Which one is used to decontaminate your equipment?

-M295 kit

Which one has the ability to destroy entire cities and impair electronic communication systems?

-Nuclear weapon detonations

Which one describes the standard hazard markings for biological hazards?

-right isosceles triangle with a blue background and red lettering.

 What should you do when issued your CPO?

– Leave items in the factory bag.

What should you do if an attack begins without warning?

– Drop to the ground, don protective mask (if not donned already) and clench buttocks tightly

Which one is an example of active use of M8 paper?

– Dipping a sheet of m8 paper into the liquid

When you are ready to wear your CPO, where should you mark or place your personal identification?

– on the CPO coat and hood

How should you remove your GCE if it is contaminated?

– go to a contamination control area to remove the GCE

What alarm condition indicates the attach is over and cbrn contamination, uxo, and other hazards are suspected or present?

– Alarm Black

READ more and know more:D  what year was the sandlot released?

If you become contaminated with chemical agents, decontaminate by processing through the CCA within ___ of contact?

– 24 hours

CCOR guidelines are designed to help you avoid chemical agent vapor hazards from chemically contaminated resources?

– True

GCE protective gloves consist of two pieces, the outer rubber gloves and ____?

– inner glove liners

Which one has adhesive coating that is protected by a strip of brown, waxed paper?

– m9 paper

M8 and m9 paper emit toxic fumes when burned?

-true

How long should it take for you to don your protective mask and ensure the seal is airtight?

-9 seconds

How should you remove our GCE if it is contaminated?

-Go to a contamination control area to remove the GCE

Although the m50 mask is not effective in confined spaces, in cbrn enviroments, the mask will protect your ____?

– face, eyes, and respiratory tract from chemical and biological warfare agents and radioactive dust particles

Which hone has the ability to destroy entire cities and impair electronic communication systems?

– nuclear weapon detonations

The waterproofing bag in the m50 mask carrier is a resealable plastic bag that is used for which purpose

– to protect the mask from moisture and wet conditions

How long during alarm red should you remain in your current position and under cover?

– Until directed otherwise

When donning the protective mask, expel the air from your lings before performing which step action?

– Perform negative pressure check

In doffing the M50 mask, which step is performed first?

– Remove headgear

In donning your cpo hood, which step comes first?

– pull the hood over the mask

Who decides to implement split MOPP?

– Installation Commander

Which type of device includes any point source that emits radiation without actively dispensing radioactive material across an area?

– RED

During the decontamination process, in a CCA you will____ your contaminated equipment.

– remove

Which type of nuclear burst occurs above 100,000 feet surface level?

– High Altitude

The chemical protective coat and trousers when worn together are call the ____

– CPO

Which type of chemical agent, when released can cause casualties for more than 24 hours to several days or weeks?

READ more and know more:D  who commissioned the lewis and clark expedition?
who decides to implement split mopp
who decides to implement split mopp

– Persistent

U.S. policy bans research, development, production, stockpiling, and acquiring of biological agents or toxins for hostile purposes.

– True

Preparedness actions to counter CBRN attacks at your installation are dependent upon the____

– threat probabilities

Which type of report is submitted by the observer upon encountering enemy activity, to higher headquarters, through the most secure means?

-SALUTE

Used decontamination kits (skin and equipment kits) are considered contaminated waste.

– True

What can be done to make M9 paper easy to remove?

– Make a pull tab on the end

The M50 mask carrier is worn on the left side of the body

– True

Which of the following are pathogens

– All of the above

Which one is a priority for immediate decontamination from CBRN contamination?

– Exposed skin

What should you do if your GCE rubber boots become contaminated with gasoline, oil, grease or cleaning fluids?

– Wipe off the boots and air-dry within two minutes to prevent deterioration.

Which one is used to detect and identify the presence of liquid chemical agents?

– M8 paper

When should you remove your CPO after it becomes contaminated?

– Within 24 hours of contamination

Which alarm condition indicates an attack by air or missile is imminent or in progress?

– Alarm red

What should you do upon issue of your protective mask?

– clean and inspect your protective mask IAW with the M60 mask T.O. and as directed

Why are vital resources, equipment, and assets covered or stored under cover prior to a CBRN attack?

– To protect them against CBRN contamination

The CBRN attack actions include preparedness, recover, and ____

– Response

The best ways to protect against the effects of exposure to _____ are by the time, distance, and shielding

– Radiation

The M50 mask has components that allow you to do which of the following while wearing the mask?

– Communicate and consume liquids

who decides to implement split mopp
who decides to implement split mopp

What should you do if the M8 paper indicates positive results?

– Treat it as contaminated and report the results

Which method may be used to deliver biological warfare agents?

– Insect vectors

READ more and know more:D  percentage of water in human body pdf

Attach M9 paper to your protective clothing near the wrists, ankles, and ____

– Both biceps

Which one shields your face, eyes, and respiratory tract from chemical and biological warfare agents and radioactive dust particles?

– Protective mask

The wavering tone warning signal alerts the base of

– air attacks

Which one is used to make the identification label for your CPO

– M9 paper or olive drab tape

Each M295 kit consists of a wallet containing four individual decon packets.  What does each packet contain?

– A decon miss filled with decon powder

Which type of nuclear burst occurs under 100,000 feet but the fireball doesn’t contact the earth’s surface?

– Air Burst

The GCE consists of the protective gloves footwear covers m8 and m9 chemical detection paper the m295 decontamination and the____

– CPO

Which part of the GCE is normally donned first?

– CPO trousers

who decides to implement split mopp
who decides to implement split mopp

The CBRN hazard marker for a chemical hazard is a ____

– Right isosceles triangle with a yellow background and red lettering

Short-term storage for the protective mask is when it is stowed for less than 30 days with the head harness pulled back and the straps tucked inside of the mask

– False

Protective actions such as obtaining immunizations and taking preventative medications as well as maintaining a fit and healthy lifestyle are individual protective actions generally for which type of hazard?

– Biological

Which methods are used to deliver chemical warfare agents?

– Theater Ballistic Missiles (TBM)

Which alarm condition indicates the attack is over and CBRN contamination, UXO, and other hazards are suspected or present?

– Alarm Black

A tactic used to divide an installation or operating location into two or more CBRN zones is called____

– Split MOPP

Leave a Reply

Your email address will not be published. Required fields are marked *